Daily Maintenance; Cleaning The Recovery Tank; Cleaning The Vacuum Filter; Cleaning The Squeegee - Pacific Proteus 26 Operating & Maintenance Instructions

DAILY MAINTENANCE

CLEANING THE RECOVERY TANK

1. Empty the recovery tank by removing the drain plug from the drain hose.
2. Unscrew the drain plug and empty the recovery tank.
Use gloves for protection from contact with dangerous solutions.
3. Lift the recovery tank.
4. Take off the vacuum plug (2) by rotating it counter-clockwise.
5. Remove the filter and its housing.
6. Rinse the tank with water.

CLEANING THE VACUUM FILTER

1. Lift the recovery tank.
2. Take off the vacuum plug by rotating it counter-clockwise.
3. Remove the filter and its housing.
4. Use water to clean the walls and the bottom of the filter.
5. If necessary, loosen the screws which lock the filter to the housing.
6. Rotate the filter counterclockwise until it is released.
7. Wash all components thoroughly.
8. Reassemble repeating the above operations inversely.

CLEANING THE SQUEEGEE

To obtain the best drying results, keep the squeegee clean.
To clean the squeegee it is necessary to:
1. Remove the hose from the squeegee.
2. Loosen the knobs (1).
3. Clean the inside of the squeegee thoroughly.
4. Clean the squeegee blades thoroughly.
5. Reassemble.
16