Connecting The Battery Connector; Battery Charge Level Indicator; Handle Bar Height - Pacific Proteus 26 Operating & Maintenance Instructions

Automatic

Hide thumbs Also See for Proteus 26:

Table of Contents

5. CONNECTING THE BATTERY CONNECTOR

After charging the batteries, reconnect the battery connector (2) to the connector

of the machine (1).

The batteries' indicator is digital with 4 ﬁxed positions and a blinking one. The

numbers, which appear on the display, show the approximate charge level.

4 = maximum charge, 3 = charge 3/4, 2 = charge 2/4, 1 = charge 1/4,

0 = (blinking) discharged batteries)

NOTE: The brush motor automatically switches off a few seconds after the

battery indicator light begins to blink. By restarting the machine, you will be al-

lowed to turn on the vacuum motor and ﬁnish drying any wet areas.

The handle bar is adjustable in three different positions, to adjust:

1. Release the lever.

2. Put the handle bar at the desired height.

3. Release the lever and the handle bar will lock into place.

MACHINE PREPARATION

Table of Contents