Weekly Maintenance; Cleaning The Squeegee Hose; Solution Tank Cleaning & Draining; Check Brake - Pacific Proteus 26 Operating & Maintenance Instructions

Automatic

Hide thumbs Also See for Proteus 26:

Table of Contents

Weekly or whenever the suction is insufﬁcient, make sure the squeegee hose is not

obstructed. To clean:

1. Take off the hose from its coupling on the squeegee.

2. Take off the other end from the recovery tank.

3. Wash the inner part of the hose with a water jet from the tank side.

4. Reassemble.

WARNING! Do not wash the hose that goes from the vacuum

motor to the vacuum plug.

SOLUTION TANK CLEANING & DRAINING

1. Remove the cap from the solution tank (1).

2. Rinse the solution tank with water.

3. Unclip the drain hose (2) from the machine. Then remove the drain plug and

empty the tank.

WARNING! Use gloves for protection from contact with dangerous

solutions.

Check the distance between the brake pads and wheels weekly. Adjust to about

1/8 inch (3mm) by adjusting the nuts shown in the picture.

WEEKLY MAINTENANCE

Table of Contents