Frequently-Used Functions; Record; Playback - Avtech AVN363 User Manual

3.4 Frequently-used functions

3.4.1 Record

To record remotely, click "
In the "Record Setting" page, you can set the following items:
‧Record type
‧Pre- / post-event record time (0~10 seconds)
‧Record time setting
‧Record path
Note: The record function will be disabled when the reserved disk capacity in "Reserved(MB)" is larger
than the current disk capacity in "Free(MB)".
When "Manual" is checked, click "
immediately, and the recordings will be saved in the location specified in "Record Path".
When "Motion" and / or "Alarm" are checked, the recording function will be enabled for any motion or alarm event,
and the recordings will be saved in the location specified in "Record Path".

3.4.2 Playback

To play a recording, click "
defaults, and you can also sort out the logs you want to speed up the search time.
" or " " → " " to go to the "Record Setting" page.
" or " " on the main control panel to start the manual recording
" or " ", and select the "Record" tab. A list of all the recordings will be shown by
7