Editing Text; Using The Cursor Keys - K-sun BEE3 Owner's Manual

Editing Text

You can edit the text by inserting or deleting characters.

Using the cursor keys

A vertical line "
position at which a character can be entered or deleted.
1 L a b e l
Cursor key
Moves the cursor one character to the right. Hold down the key to move the
cursor at high speed.
Moves the cursor one character to the left. Hold down the key to move the
cursor at high speed.
Moves the cursor to the previous (upper) line. Hold down the key to move the
cursor at high speed.
Moves the cursor to the next (lower) line. Hold down the key to move the
cursor at high speed.
Moves the cursor to the beginning of the line. When the key is pressed more
+ than once, the cursor jumps to the beginning of the previous line each time
the key is pressed.
Moves the cursor to the end of the line. When the key is pressed more than
+ once, the cursor jumps to the end of the next line each time the key is
pressed.
Moves the cursor to the beginning of the paragraph. When the key is pressed
+ more than once, the cursor jumps to the beginning of the previous paragraph
each time the key is pressed.
Moves the cursor to the end of the paragraph. When the key is pressed more
+ than once, the cursor jumps to the end of the next paragraph each time the
key is pressed.
To perform the operation indicated by
46
Basic Operations 2
" appears on the display is called cursor. The cursor indicates the
Press the cursor keys
Maximum number of the characters displayed on the screen is
12 character x 2 lines. When you keep on entering characters
beyond this limit, characters you entered in the beginning will
Cursor not be displayed on the screen. In this case, move the cursor
to check the entire text.
Cursor moving direction
+ , hold
to move the cursor.
and press the specified key.