Adding New Paragraphs; Starting A New Paragraph - K-sun BEE3 Owner's Manual

Adding New Paragraphs

The label below consists of two blocks. Each block is called paragraph in this manual,
and each paragraph is made with a group of lines or a single line. By dividing a text
into several paragraphs, you can change the number of lines or the style of the text on
a paragraph-by-paragraph basis.
You can divide a text into two paragraphs at a maximum within one label.
A label with two paragraphs
The paragraphs are placed horizontally when printed, however, they are aligned vertically on
the display.
[On the display]
Paragraph 1
Starting a new paragraph/column
Hold down the
paragraph.
:Inserting a text in two paragraphs.
Ex.
Paragraph 1
1
Enter the text in paragraph 1.
Enter " Office" in the first line and
"Extension" in the second line.
i c e
1
n s i o n
2
52
Basic Operations 2
Paragraph 1
Office
Extension
key and press
Paragraph 2
Paragraph 2
Paragraph 2 Room 1 #101
Room 2 #102
Room 3 #103
at the end of the paragraph to start a new
2 Place the cursor at the end of the
text, press
A new paragraph is created. The line
head icon
beginning of the new paragraph.
E x t e
2
1
3
Enter the text in paragraph 2.
Enter the text as follows:
First line:
Second line: Room 2 #102
Third line:
To start a new line, press
end of the line.
# 1 0 2
2
# 1 0 3
3
+ .
will appear at the
Room 1 #101
Room 3 #103
at the