Attaching Label - K-sun BEE3 Owner's Manual

6. Attaching label

Peel off the backing sheet of the label to attach.
1 Peel off the backing sheet.
x You might find it hard to peel off some of the backing sheets depending on the tape
types.
x Keep the labels away from a solvent or a thinner, and do not rub the labels with a pencil
or similar sharp tools. Otherwise the texts printed on the labels may be thin and the
labels may tear or peel.
x Characters printed on the white ink labels turn black when rubbed with a metal object.
Rub the labels with a rubber eraser to restore.
x Labels may peel off easily when attached to rough surface.
x Labels may peel off easily or not adhere well when attached to wet, oily or dusty surfaces.
x If you attach the label to the object that has writing on the surface with a pen, the pen ink
may leak in and damage the label.
x Do not attach labels on people, living things, public buildings or properties of others.
x About labels
Before attaching labels, be sure to check the purpose of use and the material of the
adhered surface. Depending on the material, environmental conditions, etc., following
problems may occur.
We shall not be liable for any damages, losses, costs, or expenses arising from these
problems.
42
Basic Operations 1
2 Attach the label and rub it firmly.