Joining Lines Or Moving Text; Layout - K-sun BEE3-EZ Operator's Manual

Joining Lines or Moving Text

Joining Lines or Moving Text
When entering lines of text you can adjust the text and line placement by placing the cursor
in the correct spot and using the Esc/Bs key or Return key.
The cursor is a flashing straight line |.
Esc/
BS
The Esc/Bs key is on upper right side of keyboard.
Return
The Return key is on lower right side of keyboard.
Try this:
1. Type in "Room 1 Class A"
2. To put Class A on the second line move cursor after "1", Return.
Label will now read: Room 1
Type Line 1 Room 1
Type Line 2 Class A
Type Line 3 Reading
To put Reading on line with Class A, position cursor after "A"
Press Esc/Bs key.
Label will now read: Room 1

Layout

1. Press Shift + Size/Style key.
2. Arrow down to Layout. Return.
3. Arrow down to see choices: Left, Center, Right
4. Highlight and Return.
5. Arrow Down to End? Return.
6. Screen will say Area Label. Return.
7.
Text will be Left Justified, Centered or Right Justified on label.
18
Class A
Class A Reading