Preparation; Connecting The Ac Adapter - K-sun BEE3 Owner's Manual

Preparation

1. Connecting the AC adapter

Connect the AC adapter that comes with your LABELShop £ BEE3 to supply
power from the electrical outlet (AC120V).
1
Connect the AC adapter
to the connector on
your LABELShop
* Be sure to connect the adapter as
far as it can go so as to supply
power steadily.
2 Plug the other end of the
AC adapter into the electrical
outlet.
x Unplug the AC adapter from both the device and the outlet after use. This may prevent
possible accidents caused by tripping over the cord.
x When handling the AC adapter cord, be sure not to pull it forcibly or bend it repeatedly.
This may break the cord.
x The safety feature of the device may cut the circuit of the AC adapter when the plug
shorts out or on other occasions.
x LABELShop £ BEE3 warranty does not apply to the AC adapter.
£
BEE3 firmly.
25
Getting Started