Turning "Autocut" Off To Print - K-sun BEE3 Owner's Manual

Turning "Autocut" Off to Print

This machine automatically cuts off the label after printing it. However, it is possible to
turn off feature.
1 Press (= Condition) while
holding down
The" Condition" menu will be displayed.
Condition
inch:cm
2
Select "Auto Cut" and press
Condition
Auto Cut
"Auto Cut" will be displayed.
3
Select "Off" using
press .
Autocut
On
x For labels that are not automatically cut, remove the cartridge from the machine, leave
0.1" of the tape on the cartridge and cut the label straight using scissors available on the
market.
x Even when Autocut is turned off, you can cut the tape using "Feed & Cut" from the "Feed/
Cut" menu.
See "Feeding the tape" (p.31).
.
.
or and
4 Press .
Printing starts.
Once the print job is complete, printing
stops but the label is not cut. Remove
the cartridge and cut the tape using
scissors or such. If you do not use the
function, repeat the above procedure
after each label.
Additional Functions
91