Using This Manual
About this manual
This manual contains the following sections:
Getting Started
Describes preparations required before using the LABELShop £ BEE3.
Basic Operations
Divided into three sections.
"Basic Operation 1" explains operations such as entering texts and attaching labels.
"Basic Operation 2" explains more advanced operations such as adding new paragraph.
"Basic Operation 3" explains how to create a label that wrap around a cable or any other
cylindrically-shaped object.
If you are a first-time user, reading from the "Basic Operation 1" is recommended.
Additional Functions
Describes useful information that can assist you complete the task more easily and more
effectively. Read and understand "Basic Operations 1" and "Basic Operations 2" before you
begin on this section.
Symbols used in this manual
The following symbols are used in this manual:
Symbol
,
,
,
,
See
Labels in this manual: Labels contained in this manual are all samples and may differ from
Indicates operation procedures.
Indicates the character keys.
Indicates the function keys.
Indicates the keys to move the cursor or select an item.
Introduces the reference pages. Refer to the specified pages as
necessary.
Indicates useful tips.
Explains limitations and conditions that you should be aware of.
actual labels.
Description
7
Introduction