Sonars & Sensors - Gemini 720is Product Manual

Gemini Software Operation
To enable data input to the system select Enabled for the COM Ports or Gemini Hub.
The COM Ports drop-down list is for serial ports that are connected to the computer
(either natively or through an RS232 to USB converter) and is also for configuration of the
RS232 functionality of the Gemini Sonar head. The Gemini Hub drop-down list is only for
configuration of connected Gemini Hubs.
Selecting Enabled for either Gemini Hub or COM Ports will alter the tab options in the
bottom left of the screen. If both are disabled there will be no tabs visible and the status area
will only display information about connected Gemini heads.
5.3.1. Sonars & Sensors
The Sonars tab is for displaying information and is the same display when no tabs are
present (for a full description see Section 5.2.1, "System Data").
The Sensors tab is for displaying extra information from connected RS232 sensors.
Document: 0703-SOM-00002, Issue: 1
With Gemini Hub selected.
With COM Ports selected.
With Gemini Hub and COM Ports selected.
46
Gemini 720is Imaging Sonar
© Tritech International Ltd.