Gemini 720is Product Manual page 74

Setting the computer IP address in Windows 7
A list of attached network devices should now present itself. Find the one which the Gemini
head is to be connected to and double-click on it.
The Local Area Connection Properties dialog should be displayed. Find the entry
labelled Internet Protocol Version 4 (TCP/IPv4), select it and then click on the
Properties button.
In the properties dialog which opens there will either be Obtain
automatically or Use the following IP address selected. If an IP address is
already present, make a note of it before changing any values since it will be needed if the
computer is ever restored to the previous network. Refer to appropriate section of this manual
for the correct IP addresses to use.
Document: 0703-SOM-00002, Issue: 1 74
Gemini 720is Imaging Sonar
an IP address
© Tritech International Ltd.