Settings Files; Keyboard Shortcuts - Gemini 720is Product Manual

Gemini Software Operation

5.7. Settings Files

The Gemini software stores all the settings in the file C:\GeminiData\Settings
\Gemini.xml. A backup of this file can be kept as a record of all the Gemini settings. When
contacting Tritech International Ltd Technical Support it may be necessary to supply a copy
of this file.
The Gemini software keeps a historical log of settings files in the folder C:\GeminiData
\Settings, with folder and file names automatically generated from the date and time. This
can be useful for restoration of previously known good settings. To use a previous settings
file:
1. Shut down the Gemini software.
2. Delete (or rename) the C:\GeminiData\Settings\Gemini.xml file.
3. Copy the historical settings (*.xml) file into the location C:\GeminiData\Settings and
rename it to Gemini.xml
4. Start the Gemini software.
A factory settings file is stored in the install folder (normally C:\Program Files\Tritech
\Gemini\Factory.xml). To revert completely to the factory settings file:
1. Shut down the Gemini software.
2. Delete (or rename) the C:\GeminiData\Settings\Gemini.xml file.
3. Copy the Factory.xml file into the location C:\GeminiData\Settings and rename
it to Gemini.xml
4. Start the Gemini software.

5.8. Keyboard Shortcuts

A number of keyboard shortcuts are available for commonly used activities.
F7 Toggle Logging of data
Ctrl F Capture the screen to file
A Increase gain
Z Decrease gain
D Increase range
C Decrease range
Document: 0703-SOM-00002, Issue: 1 53
Gemini 720is Imaging Sonar
© Tritech International Ltd.