Single Titan Impulse Mks(W)-307-Fcr Connector; Seacon 5506-1508 And Seacon 5506-1506 Connectors - Gemini 720is Product Manual

Hardware Installation & Configuration

3.3.5. Single Titan Impulse MKS(W)-307-FCR connector

S11415 (1000m) only
Gemini 720is fitted with a single Titan Impulse MKS(W)-307-FCR connector using VDSL
communications. An auxiliary RS232 input can be fed into the sonar.
Bulkhead view
5

3.3.6. Seacon 5506-1508 and Seacon 5506-1506 connectors

S11127 (1000m) or S11128 (4000m)
Gemini 720is fitted with two Seacon 55 series connectors. The main connector uses Ethernet
communications with the auxiliary connector providing an additional Ethernet communication
line and regulated 24V DC output.
MAIN
Bulkhead
view
7 8
4 5 6
1 2 3
S11017 (1000m) or S11027 (4000m)
Gemini 720is fitted with two Seacon 55 series connectors. The main connector uses Ethernet
communications with the auxiliary connector allowing either RS232 or RS485 (software
selectable) communications to an attached device. A regulated 24V DC output is also
available.
Document: 0703-SOM-00002, Issue: 1
1
2
4 3
6
7
MAIN
Pin Function
1 Ethernet Rx+
2 Ethernet Rx-
3 Ethernet Tx+
4 DC +
5 N/C
6 Ethernet Tx-
7 DC Ground
8 N/C
Pin
1 DC Ground
2 DC +
3 RS232 Rx
4 RS232 Tx
5 RS232 Ground
6 VDSL +
7 VDSL -
AUX
Pin Function
1 Ethernet Rx+
2 Ethernet Rx-
3 24V DC +
4 0V DC
5 Ethernet Tx+
6 Ethernet Tx-
15
Gemini 720is Imaging Sonar
Function
AUX
Bulkhead
view
6
4 5
1 2 3
© Tritech International Ltd.