Entering Characters - Sony BVM-F170 Operation Manual

When selecting in setting mode
1
Using the UP or DOWN button or PHASE knob, select
the desired item and press the ENTER or Ent button.
The cursor moves to the setting value and the monitor
enters in setting mode.
Display example
iChannel Configuration
CH01
Format
Input Port:
Input No:
Screen Aspect
Sync Mode:
Color Temp:
Picture Preset:
Matrix
Color Profile
2
Using the UP or DOWN button or PHASE knob, select
the setting value.
3
Press the ENTER or Ent button.
The setting is confirmed and the cursor returns to the
item.
When selecting from the setting list
1
Using the UP or DOWN button or PHASE knob, select
the desired item in the setting list.
Display example
iiiParallel Remote
1 Pin
CH:
---
Under Scan
Over Scan
Native Scan
16 : 9
H Delay
V Delay
External Sync
Comb
2
Press the ENTER or Ent button.
The setting is confirmed and the display returns to the
menu of the upper level.
Entering numerical values
1
Using the UP or DOWN button or PHASE knob, select
the desired item and press the ENTER or Ent button.
32
Basic Menu Operations
v
1/3
V
B
xxxxx
xxxxx
B
xxx
Cursor
xxx
xxxxx
B
B
Set: ENTER Cancel: MENU
v
1/5
V
01
The cursor moves to the setting value and the monitor
enters in setting mode.
Display example
iChannel Configuration
CH01
xxxxx
Marker Preset
xxx
H Shift Offset:
B
Channel Name
xx
NTSC Setup Level::
xxxxx
Component Level:
xxx
Betacam Setup Level::
B
RGB Range:
B
1080I/PsF
Set: ENTER Cancel: MENU
2
Select the value in one of the following three ways:
• Enter the value directly using the numeric buttons
and press the ENTER or Ent button. (only the item
whose the value of setting range is over 0)
• Select the value using the UP or DOWN button.
• Select the value using the PHASE knob.
3
Press the ENTER or Ent button.
The setting is confirmed and the cursor returns to the
item.

Entering characters

1
Using the UP or DOWN button or PHASE knob, select
New Name or the existing name.
The "---" means that one or more characters can be
entered in sequence after the existing name.
2
Press the ENTER or Ent button.
3
Using the UP or DOWN button or PHASE knob, select
the characters that you wish to enter.
Display example
iiChannel Name
CH01
PROG___
EDIT___
CAM___
VTR___
PREV___
New Name
v
2/3
V