Entering Characters - Sony Trinitron BVM-20G1U Operation Manual

Basic Menu Operations
2
Set the value in one of the following three ways:
• Enter the value directly using the numeric keypad
• Select the value using the UP/DOWN buttons
• Select the value using the PHASE knob
3
Press the ENTER button.
The setting is confirmed (The item is displayed in
white text again).

Entering characters

1
Display the setting menu and set the cursor to
NEW NAME using the UP/DOWN buttons or
PHASE knob.
C H A N N E L N A M E
P R O G
E D I T
C A M
V T R
N E W N A M E
p
2
Press the ENTER button.
"?" is displayed in yellow. The "?" indicates the
position where character input is possible.
C H A N N E L N A M E
P R O G
E D I T
C A M
V T R
p N E W N A M E
?
24
3
Select the character you wish to enter using the
UP/DOWN buttons or PHASE knob. When you
press the UP button, or turn the PHASE knob
clockwise, the characters and symbols appear in
the order shown below.
A, B, .............Y, Z, 0, 1, ...............8, 9, ( , ), :, ;, .,
-, +, /, &, CH, (space), ?
If you press the UP/DOWN button or turn the
PHASE knob, the characters and symbols appear
in the reverse order described above.
4
Press the ENTER button.
The selected character is entered.
C H A N N E L N A M E
P R O G
E D I T
C A M
V T R
p N E W N A M E
C ?
5
Repeat steps 3 and 4 until all the characters are
entered, then press the ENTER button.
The selected characters are confirmed, and the
display returns to the menu of the previous level.
To correct the entered character
Press the Del button on the numeric keypad. The
character on the left side of the "?"(in yellow) is
deleted.