Beep Alarm; Radio Alarm; Section Ii - Digitally-Tuned Pll Am/Fm Radio; How To Use The Radio - Oregon Scientific RRM968P User Manual

BEEP ALARM

To activate / deactivate the alarm, press [ALARM ON/OFF ] when
the main unit is in Alarm display
When Beep Alarm goes off the EL backlight and projection will
activate for 5 seconds. Press any key to silence the alarm.
When [SNOOZE/LIGHT] is pressed to stop the alarm sound (only
when Beep Alarm mode is selected), the
after 8 minutes. To disable the snooze function, press [ALARM]
or [ALARM ON/OFF ] or press and hold [SNOOZE/LIGHT] for
3 seconds when alarm goes off.
Please note that the Radio, if active, will be temporarily interrupted
until the Beep Alarm is turned off.

RADIO ALARM

When the Radio Alarm is turned on, the Radio will be turned on for
2 hours. You can intervene by setting the time period for the Sleep
function by using [SLEEP] or simply turn off the radio at any time.
HOURLY CHIME FUNCTION
When the hourly chime function is on, "
and a beep will sound at the beginning of each hour. You can activate
or deactivate this function in
(please refer to Section "SETTING THE CLOCK AND
CALENDAR MANUALLY").
mode.
alarm will go off
" will be displayed
the clock and calendar setting mode
Section II - Digitally-tuned PLL AM/FM

HOW TO USE THE RADIO

All radio functions can only be operated when
again
To turn on the radio press [RADIO]. The radio will
last preset radio station and volume.
Press [AM/FM] to select the radio band.
the desired radio frequency. Press once and the value will advance
by 1 step. Press and hold for 2 seconds to enter the Radio Channel

auto-search function.

Use [VOL +] or [VOL -] to increase or decrease the volume.There
are a total of 16 (0-15) - steps.
To toggle among the programmed stations, press [STATION].
To turn off the radio, press [ RADIO ].
AUTO-SEARCH FUNCTION
The unit is equipped with an Auto-Search function and can
automatically search for the next clear channel. To activate this
function, press and hold [+TUNING -] for 2
the frequency will keep increasing or decreasing until a clear channel
is found. Once Auto-Search
pressing the button.
8
Radio
the Radio is on.
return to
Use [+TUNING -] to locate
seconds. The value of
is activated, you can release and stop
the