Oregon Scientific RM912B - RF Desktop Clock with Auto Backlight Manual

OVERVIEW

LCD DISPLAY / FRONT VIEW

1. Clock signal reception indicator
2. : Increase setting; activate clock reception signal
3. : Decrease setting; deactivate clock reception signal
4. : Toggle between calendar and alarm displays; enter alarm setting mode; mute alarm
5. : Activate / deactivate alarms; mute alarm
6. : Toggle among display modes; enter clock and calendar setting mode
7. Calendar
8. Clock (with weekday display)
9. : Stop and snooze alarm; activate backlight

BACK VIEW

1. Battery compartment
2. RESET: Reset unit to default settings

GETTING STARTED

INSERT BATTERIES

1. Remove the battery compartment (FIG 2).
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.

NOTE: A flashing 'BA' indicates batteries are low.

TOGGLE DISPLAY MODE

You can press to toggle among the following display modes:

• Clock with second / Calendar
• Clock with weekday / Calendar
• Clock with weekday / 2^nd time zone
• Clock with weekday / 2^nd time zone calendar

You can also press to toggle among Calendar, Alarm 1 ((1)) and Alarm 2 ((2)).

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock automatically with DCF-77 signal, within 1500 km (932 miles) of Frankfurt, Germany.

To enable / disable signal reception:
Press and hold to enable or to disable signal reception.
NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal.

Clock signal reception indicator:

STRONG SIGNAL	WEAK SIGNAL	NO SIGNAL

SET CLOCK

To set the clock manually, disable the signal reception first.

1. Press and hold .
2. Press or to change the settings.
3. Pressto confirm.
4. The settings order is: hour, minute, year, month, day, language and 2^nd time zone offset.

Time zone offset sets the clock +/- 12 hours from the received clock signal time.

NOTE: The language options are English (E), German (D), French (F) and Italian (I).

ALARM

2 separate alarm times can be set.

To set Alarm1 or Alarm 2:

1. Pressto select ((1)) or ((2)).
2. Press and hold .
3. Press to set hour / minute.
4. Press to confirm. or indicates alarm is ON.

To toggle alarms ON / OFF:

1. Press to select ((1)) or ((2)).
2. Press to turn alarm ON / OFF.

To toggle between or :

Press .

To silence the alarm:

• Press to silence it and activate the 8-minute snooze function.
  OR
• Press or to turn the alarm off and activate it again after 24 hours.

BACKLIGHT

Press to activate the backlight for 8 seconds.

NOTE: The backlight will automatically turn on when the unit is lifted, and will turn off once the unit is placed back on desk.

RESET

Press RESET to return to the default settings.

PRECAUTIONS

• Do not subject the unit to excessive force, shock, dust, temperature or humidity.
• Do not cover the ventilation holes with any items such as newspapers, curtains etc.
• Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive materials.
• Do not tamper with the unit's internal components. This invalidates the warranty.
• Only use fresh batteries. Do not mix new and old batteries.
• Images shown in this manual may differ from the actual display.
• When disposing of this product, ensure it is collected separately for special treatment.
• Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information.
• The contents of this manual may not be reproduced without the permission of the manufacturer.
• Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
• Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use.

NOTE: The technical specifications for this product and the contents of the user manual are subject to change without notice.

SPECIFICATIONS

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you're in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support
OR
Call 1-800-853-8883.
For international inquiries, please visit:
www2.oregonscientific.com/about/international

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientific, declares that this RF Desktop Clock with Auto Backlight (model: RM912B) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.

COUNTRIES RTTE APPROVAL COMPLIED
All EU countries, Switzerland CH
and Norway N

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Oregon Scientific RM912B - RF Desktop Clock with Auto Backlight Manual