Oregon Scientific RM330P, RM330PU - RF Projection Clock With Indoor Thermometer Manual

INTRODUCTION

Thank you for selecting the Oregon Scientific^TM RF Projection Clock with Indoor Thermometer (RM330P/RM330PU). This device bundles precise time keeping, alarm and temperature features into a single timepiece. Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know.

PACKAGE CONTENTS

OVERVIEW

MAIN UNIT

1. • Press to decrease a value in setting mode
   • Press and hold to decrease a value rapidly in setting mode
   • Press to flip the projection light by 180° in idle
   • Press and hold to turn off the RF clock signal reception in idle
2. • Press to increase a value in setting mode
   • Press and hold to increase a value rapidly in setting mode
   • Press to flip the projection light by 180° in idle
   • Press and hold to turn on the RF clock signal reception in idle
3. • Press to turn on/off the alarm function.
   • Press to turn off the alarm sound when alarm is ringing (alarm will activate in the next day).
4. • Press to toggle between calendar display mode and alarm display mode.
   • In alarm display mode, press and hold for 2 seconds to enter alarm setting mode.
5. • Press to toggle between clock: second /clock: weekday display mode.
   • Press and hold for 2 seconds to enter clock time setting mode.
6. Snooze/Light
   • Press to turn on the backlight and projection for 5 seconds
   • Snooze the alarm
   • Press and hold until the unit beeps to turn on the projection for 5 minutes.
7. Projection lens
8. RESET - Press to reset the unit to factory default
9. AC power adaptor jack
10. Battery compartment

LCD DISPLAY

1. Time/Weekday/Seconds display
2. Calendar (Month/Date; Date/Month)/Alarm display/Indoor temperature display

Symbol	Description
	RCC signal received
	Alarm is on
	Low battery
	Time zone selection indicator
	Alarm display mode

GETTING STARTED

INSTALL BATTERIES

1. Remove the battery compartment cover.
2. Install the supplied 2 x 1.5 V AAA alkaline batteries, matching the polarity symbols (+ and -).
3. The clock enters standby mode and the time appears on the display.

NOTE

• Replace the batteries when displays, or when the display/backlight is dim. Press RESET after each battery replacement.

CONNECT AC ADAPTER

Connect the supplied AC adapter to the power jack on the bottom of the unit and plug into a standard outlet.

NOTE: The batteries are only for back-up power source to save the time, alarm and calendar information. Always connect the unit to the power grid source via AC/DC adapter.

CLOCK

CLOCK RECEPTION

This clock synchronizes automatically with a clock signal. Press and hold to turn on and search for the clock signal.
Press and hold to turn on and search for the clock signal.
The main unit is able to receive RF clock data with different RCC signal:

NOTE: Not applicable to Asia and non-designated areas.

Clock signal reception indicator:

Icons	Description
	Main unit is searching for clock signal strength
(flash)	Main unit is searching for clock signal
	No clock signal
	Strong RCC signal received
	Weak RCC signal received

NOTE: It takes 2-10 minutes to receive the clock signal. If the signal is weak, it could take up to 24 hours to receive a valid signal.

SETTING THE CLOCK MANUALLY

1. Press and hold to disable signal reception. The icon turns off.
2. Press and hold for 2 seconds to enter clock setting mode.
3. Press once or press and hold /to quickly adjust the settings for 12/24 hour format → time-zone offset (+/-23 hours) → hour → minute → year → calendar format (monthday/day-month) → month → date → temperature unit (°C/°F) and weekday language.
4. Press to confirm and go to the next setting.

NOTE:

• Complete each step within 20 seconds or the clock will exit the clock setting mode.
• In clock setting mode, press and hold for 2 seconds to exit the setting mode.
• The language options are English (EN), German (GE), French (FR), Italian (IT) and Spanish (SP).
• The RCC signal reception is on after each reset or battery replacement.
• The RCC signal turns off automatically when you set time, year, month or date manually.

ALARM

SETTING ALARM

1. Press and hold for 2 seconds to enter alarm setting mode in alarm display mode. The clock digits flash.
2. Press once or press and hold /to quickly adjust the setting.
3. Press to confirm and go to the next setting.
4. To turn on/off the alarm, press .

OPERATION

When the alarm sounds, the backlight will flash. You may:

• Press Snooze to stop the alarm for 8 minutes. The alarm indicator will flash.
• Press to stop the alarm for 24 hours.

PROJECTION / BACKLIGHT

Press Snooze to turn on the projection and backlight for 5 seconds, or press and hold until the unit beeps to turn on the projection for 5 minutes. For the optimal projection results, place the unit within 1.5 - 2 m (5 - 6.5 ft) from the ceiling or wall.
To use the continuous projection feature, connect the AC power adaptor to a suitable outlet.

NOTE: When you press and hold the Snooze/Light to turn on/off the projection, the device beeps once.

PRECAUTIONS

• Do not subject the unit to excessive force, shock, dust, temperature or humidity.
• Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive materials.
• Do not tamper with the unit's internal components. This invalidates the warranty.
• Only use fresh batteries. Do not mix new and old batteries.
• Images shown in this manual may differ from the actual display.
• When disposing of this product, ensure it is collected separately for special treatment.
• Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information.
• The contents of this manual may not be reproduced without the permission of the manufacturer.
• Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
• Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use.

NOTE: The technical specifications for this product and the contents of the user manual are subject to change without notice.

NOTE: Features and accessories will not be available in all countries. For more information, please contact your local retailer. To download an electronic version of the user manual, please visit http://global.oregonscientific.com/ customerSupport.php.

SPECIFICATIONS

MAIN UNIT

NOTE: When the indoor temperature is lower than -5°C (23.0°F), the screen displays LL.L. When the temperature is higher than 50°C (122.0°F), the screen displays HH.H.

ABOUT OREGON SCIENTIFIC

Visit our website www.oregonscientific.com to learn more about Oregon Scientific products.
For any inquiry, please contact our Customer Service at info@oregonscientific.com.
Oregon Scientific Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Oregon Scientific RM330P, RM330PU - RF Projection Clock With Indoor Thermometer Manual