Hitachi compute blade 500 series Getting Started Manual page 48

User ID creation for management module
Create a user ID <yyyyyyyy> for the management module to operate the
LAN switch module.
1 Start a terminal emulator to the switch module from the system console.
.
2 Input <operator>, and then press Enter.
.
3 Change user mode to administrator mode.
.
Input enable, and then press Enter.
4 Add a new user ID.
.
Input adduser <yyyyyyyy>, and then press Enter.
5 Set a password to the user ID.
.
Input <new password>, and then press Enter.
2-24
Initial setup
Hitachi Compute Blade 500 Series Getting Started Guide