Hitachi compute blade 500 series Getting Started Manual page 38

Management LAN port configuration
Configure the LAN port #0 (MGMT0) of the management module to recognize
the management LAN port of the LAN switch module.
Tip: The following procedure described in this section is an example of
configuring the LAN port #0.
Only IPv4 addresses can connect to the management LAN port of the
management module.
1 Login to the web console of the management module.
.
Tip: For details of login procedure, see
procedure on page 2-4
2 The Web console menu is displayed after login, and then click Resources
.
tab.
3 Click Systems tab.
.
2-14
in
Initial setup
Hitachi Compute Blade 500 Series Getting Started Guide
Login on page 2-4
Management module configuration on page
of Initial setting
2-4.