Hitachi compute blade 500 series Getting Started Manual page 46

User ID creation
Create a user ID.
1 Change user mode to administrator mode.
.
Input enable, and then press Enter.
2 Add a new user ID.
.
Input adduser <newuser ID>, and then press Enter.
3 Set a password to the new user ID.
.
Input <new password>, and then press Enter.
4 Input <new password> again, and then press Enter.
.
5 Go back to normal user mode, input disable, and then press Enter.
.
2-22
Initial setup
Hitachi Compute Blade 500 Series Getting Started Guide