Hitachi compute blade 500 series Getting Started Manual page 47

Tip: The account of <newuser ID> is permitted as the user privilege only,
not administrator.
If you input enable, the user privilege will change to the system
administrator privilege.
Logout
1 Input logout at the prompt, and then press Enter.
.
User ID confirmation
Confirm whether <newuser ID> has been created correctly. <newuser ID>
is created as User ID creation.
1 Start a terminal emulator to the switch module from the system console.
.
2 Input <newuser ID>, and then press Enter.
.
3 Input the defined <password>, and then press Enter.
.
4 Confirm the following whether the login was successful.
.
5 Input logout, and then press Enter.
.
Hitachi Compute Blade 500 Series Getting Started Guide
Initial setup
2-23