Hitachi compute blade 500 series Getting Started Manual page 53

8 Enter the username and password that created in
.
management module on page 2-24
box. And then click OK.
Default user ID deletion
Delete the default user ID <operator> after login with the username and
password that created in
1 Start a terminal emulator to the switch module from the system console.
.
2 Input <newuser>, and then press Enter.
.
3 Input <new password>, and then press Enter.
.
Hitachi Compute Blade 500 Series Getting Started Guide
in the Authorization settings dialog
User ID creation on page
Initial setup
User ID creation for
2-22.
2-29