Lens Files - Sony PXW-X400KC Operating Instructions Manual

114 000
8. Saving and Loading User Configuration Data

Lens Files

Saving a Lens File in Internal Memory
1
Select File >Lens File >Store Internal Memory
in the setup menu.
A lens file list screen appears.
2
Turn the MENU knob to select a destination,
then press the knob.
You can save files in rows with File ID of "No
offset." Selecting a row with a specified File ID
name will overwrite the selected file.
The File ID is generated automatically, but you
can modify it.
3
Turn the MENU knob to select [Execute] on the
confirmation message screen, then press the
knob.
Saving a Lens File on an SD Card
1
Select File >Lens File >Save SD Card in the
setup menu.
A lens file save destination screen appears.
2
Turn the MENU knob to select a destination,
then press the knob.
You can save files in rows with a File ID of "No
File." Selecting a row with a specified File ID
name will overwrite the selected file.
The File ID is generated automatically, but you
can modify it.
3
Turn the MENU knob to select [Execute] on the
confirmation message screen, then press the
knob.
Changing the File ID
1
Select File >Lens File >File ID in the setup
menu.
A screen for editing the File ID appears.
2
Select characters and enter the File ID.
3
Turn the MENU knob to select [Done], then
press the knob.
The File ID is updated.
Loading a Lens File from Internal
Memory
1
Select File >Lens File >Recall Internal Memory
in the setup menu.
A lens file list screen appears.
2
Turn the MENU knob to select a file to load,
then press the knob.
A confirmation screen appears.
3
Turn the MENU knob to select [Execute], then
press the knob.
Loading a Lens File from an SD Card
1
Select File >Lens File >Load SD Card in the
setup menu.
A lens file list screen appears.
2
Turn the MENU knob to select a file to load,
then press the knob.
A confirmation screen appears.
3
Turn the MENU knob to select [Execute], then
press the knob.
Loading a Lens File Automatically
When you are using a lens that supports serial
communication, you can set up the camcorder
by automatically loading the lens file that
corresponds to the lens settings (Lens Auto Recall
function).
To use the Lens Auto Recall function, set File >Lens
File Lens >Auto Recall in the setup menu to one of
the following.
Off: Do not use the Lens Auto Recall function.
On (Lens Name): Load the lens file that
corresponds to the lens model name.
On (Serial Number): Load the lens file that
corresponds to the lens model name and
serial number (when the lens supports
communication of the serial number).
If the lens does not support communication of
the serial number, even when set to On (Serial
Number), load the lens file that corresponds to the
lens model name.