Loading Scene Files; Saving And Loading Lens Files; Setting Lens File Data; Saving Lens Files - Sony PMW-400K Operating Instructions Manual

5
To execute the save, select "Execute,"
and then press the MENU knob.
To cancel the save, select "Cancel," and
then press the MENU knob.
If you selected Scene Store SxS in step 2, the
ACCESS lamp lights when you execute the
save (in blue on the right-side panel and in
orange in the card slot section).
When the data has been saved to the SxS
memory card, a completion message appears
and the ACCESS lamp goes out.

Loading Scene Files

Insert an SxS memory card into a memory card
slot, then proceed as follows.
See "Basic Setup Menu Operations" (page 110) for
information about menu operations.
1
Select "FILE" > "Scene" in the setup
menu.
2
Select "Scene Recall Mem" or "Scene
Recall SxS."
Select "Scene Recall Mem" if you want to
load the file from the camcorder's internal
memory, and select "Scene Recall SxS" if
you want to load the file from an SxS
memory card.
3
Press the MENU knob.
A list box of scene files appears. File
numbers where "No File" is displayed are
empty file numbers.
4
Select the desired file number, and then
press the MENU knob.
A confirmation message appears.
5
To execute the load, select "Execute,"
and then press the MENU knob.
To cancel the load, select "Cancel," and
then press the MENU knob.
If you selected "Scene Recall SxS" in step 2,
the ACCESS lamp lights when you execute
the load (in blue on the right-side panel and
in orange in the card slot section).
When the data has been loaded from the SxS
memory card, a completion message appears
and the ACCESS lamp goes out.
166

Saving and Loading Lens Files

Saving and Loading
Lens Files

Setting Lens File Data

Set the data in lens files on "FILE" > "Lens" in
the setup menu (see page 156).
You can set the following data and save it as a
lens file.
Setting data
V modulation shading
compensation values
Center marker position
Flare level
White balance
compensation value
White shading
compensation value
See "Basic Setup Menu Operations" (page 110) for
information about menu operations.

Saving Lens Files

Insert an SxS memory card into a memory card
slot, then proceed as follows.
See "Basic Setup Menu Operations" (page 110) for
information about menu operations.
1
Select "FILE" > "Lens" in the setup
menu.
To assign a name to the data before saving
it
Assign a name before proceeding to step 2.
For details, see "To assign names to files"
(page 164).
Sub-items
M V Modulation
Lens Center H
Lens Center V
Lens R Flare
Lens G Flare
Lens B Flare
Lens W-R Offset
Lens W-B Offset
L R/G/B H Saw
L R/G/B H Para
L R/G/B V Saw
L R/G/B V Para