Sony PXW-X400KC Operating Instructions Manual page 100

100 000
7. Menu Display and Settings: Menu List
Maintenance >Camera Config
Makes settings related to various camcorder operations.
Item Setting
RM/Camera/PARA
RM Rec Start
SET Key on Thumbnail Pause/Play
ALAC Auto/Off
Maintenance >Preset White
Makes settings related to white balance preset values.
Item Setting
Color Temp <P> 1500K to 3200K
C.Temp BAL <P> –99 to ±0 to +99
R Gain <P> –99 to ±0 to +99
B Gain <P> –99 to ±0 to +99
AWB Enable <P> On/Off
Color Temp <P> 1500K to 3200K
Description
Selects which of the recording start/stop buttons
are enabled when a remote control unit is
connected,
RM: Remote control unit
Camera: Camcorder
PARA: Both
Selects the operation when the MENU knob is
pressed with only one thumbnail selected.
Sets whether to execute ALAC (Auto Lens
Aberration Correction) automatically.
Auto: Execute ALAC automatically when an
ALAC-compatible lens is attached and ALAC
is enabled.
Off: Do not execute.
[Note]
Depending on the aberration correction lens, the
aberration correction function may not be activated
immediately ("ALAC" does not appear on the viewfinder
screen) after turning the power on, even when this
setting is set to Auto. If this occurs, turn the lens zoom
ring and focus ring to the end stop and back, and check
whether the "ALAC" indicator appears on the viewfinder
screen.
Contact a Sony service representative for information about
aberration correction lenses.
Description
to 50000K Sets the white balance preset value.
Sets the fine color temperature settings, for use
when a satisfactory image cannot be obtained
using Color Temp<P>.
Sets the R gain preset value.
Sets the B gain preset value.
Turns execution of the AWB (auto white balance)
function on/off when the WHITE BAL switch is set
to PRST.
to 50000K Sets the white balance preset value.
Maintenance >Preset White
Makes settings related to white balance preset values.
Item Setting
±0
C.Temp BAL <P> –99 to to +99
±0
R Gain <P> –99 to to +99
BGain <P> –99 to ±0 to +99
AWB Enable <P> On/Off
Maintenance >White Filter
Makes settings related to filters.
Item Setting
ND Filter C.Temp On/Off
3200K/4300K/5600K/6300K
ND FLT C.Temp<1>
ND FLT C.Temp<2-4> 3200K/4300K/5600K/6300K
Electrical CC<A> 3200K/4300K/5600K/6300K
Electrical CC<B> 3200K/4300K/5600K/6300K
Electrical CC<C> 3200K/4300K/5600K/6300K/
---
Electrical CC<D> 3200K/4300K/5600K/6300K/
---
Maintenance >DCC Adjust
Makes settings related to DCC (dynamic contrast control).
Item Setting
DCC Function Select DCC/Fix
Description
Sets the fine color temperature settings, for use
when a satisfactory image cannot be obtained
using Color Temp<P>.
Sets the R gain preset value.
Sets the B gain preset value.
Turns execution of the AWB (auto white balance)
function on/off when the WHITE BAL switch is set
to PRST.
Description
Turns the function that assigns electrical CC filters
to ND filters on/off.
Selects the color temperature when electrical CC
filters are assigned to ND filters (filter 1).
Selects the color temperature when electrical CC
filters are assigned to ND filters (filters 2 to 4).
Selects the color temperature when the electrical
CC filter switching function is assigned to an
assignable switch.
Selects the color temperature when the electrical
CC filter switching function is assigned to an
assignable switch.
Selects the color temperature when the electrical
CC filter switching function is assigned to an
assignable switch. Select "----" if not using C.
Selects the color temperature when the electrical
CC filter switching function is assigned to an
assignable switch. Select "----" if not using D.
Description
Selects the setting method for the knee point
when the OUTPUT/DCC switch is set to CAM with
DCC on.
DCC: Automatically adjusts the knee point to
match the luminance of the subject.
Fix: Sets the knee point to a fixed value.