Sony PXW-X400KC Operating Instructions Manual page 107

107 000
7. Menu Display and Settings: Assigning Functions to Assignable Switches
Functions That Can Be Assigned to the ASSIGN. 1 and 3 Switches, the
ASSIGNABLE 4 and 5 Switches, and the ONLINE Button
Assignable Switch setting Function
Off No assignment
Front Mic Switches between stereo (On) and monaural (Off)
when a stereo microphone is connected.
Marker Turns the display of all markers on/off.
ATW Turns ATW (auto tracing white balance) mode on/
off.
ATW Hold Hold the white balance setting in the ATW mode. —
Turbo Gain Executes Turbo Gain according to the setting of
Operation >Gain Switch >Gain Turbo.
Rec Review Executes recording review.
Rec Starts or stops recording.
Network Client Mode Turns network client mode on/off.
Streaming Turns streaming transmission on/off.
Auto Upload(Proxy) Turns proxy clip auto transfer on/off.
Picture Cache Turns picture cache recording mode on/off.
Spotlight Turns the spotlight function in auto iris mode on/
off.
Backlight Turns the backlight function in auto iris mode on/
off.
VF Mode Switches the viewfinder screen between B&W
(On) and color (Off).
Video Signal Monitor Switches the video signal monitor display
function.
Lens Info Switches the depth of field indication between
off, displayed in meters, and displayed in feet.
Zoom Tele/Wide When a lens that supports serial communication
is installed, assigns the Zoom Tele function to
ASSIGNABLE 4, and assigns the Zoom Wide
function to ASSIGNABLE 5 (displayed only when
<4> and <5> are set).
Assignable Switch setting Function
Zoom Wide/Tele
State when camcorder is
next powered on
Focus Magnifier
—
Zebra
Setting retained
Lens RET
Setting retained
Setting not retained
Return Video
Return Video2
Return Video3
Setting not retained
Return Video4
— Shot Mark1
— Shot Mark2
Setting retained OK Mark
Setting not retained Clip Flag OK
Setting retained
Clip Flag NG
Setting retained
Setting retained
Clip Flag Keep
Setting retained
Color Temp SW 3200K
Color Temp SW 4300K
Setting retained
Color Temp SW 5600K
Setting retained Color Temp SW 6300K
Electrical CC
Setting retained
—
When a lens that supports serial communication
is installed, assigns the Zoom Wide function to
ASSIGNABLE 4, and assigns the Zoom Tele
function to ASSIGNABLE 5 (displayed only when
<4> and <5> are set).
Turns the focus magnification function on/off.
Turns zebra display on/off.
Displays return video signal.
When a camera extension unit is not connected:
Rec Review (if playback is allowed)
Displays the return 1 video signal.
Displays the return 2 video signal.
Displays the return 3 video signal.
Displays the return 4 video signal.
Writes Shot Mark1.
Writes Shot Mark2.
Adds or deletes an OK mark.
Adds/Clears an OK mark to/from the clip being
recorded or played.
Adds/Clears an NG mark to/from the clip being
recorded or played.
Adds/Clears a KP (Keep) mark to/from the clip
being recorded or played.
Adjusts white balance using 3200K preset value.
Adjusts white balance using 4300K preset value.
Adjusts white balance using 5600K preset value.
Adjusts white balance using 6300K preset value.
Function that switches the electrical CC filter
(3200K/4300K/5600K/6300K) applied to white
balance adjustment values.
Sequence with each press of the switch/button:
3200K  4300K  5600K  6300K
Can be changed using menu settings (Electrical
CC <A> <B> <C> <D>).
[Note]
This function is not available when Maintenance >White
Filter >ND Filter C.Temp in the setup menu is set to On.
If you set ND Filter C.Temp to On after assigning the
function, the assignable switch ceases to function.
State when camcorder is
next powered on
—
Setting not retained
Setting not retained
—
—
—
—
—
—
—
—
Setting not retained
Setting not retained
Setting not retained
Setting retained
Setting retained
Setting retained
Setting retained
Setting retained