Sony PXW-X400KC Operating Instructions Manual page 20

000 20
1. Overview: Screen Display
8.
Tally indicator
Lights up when recording is started by a press
of the REC START button on this camcorder, the
VTR button on the lens, or the VTR button on the
remote control unit.
When an abnormality occurs, the tally indicator
flashes to indicate a warning.
9.
PEAKING knob
Turning this knob clockwise adjusts the picture
sharpness, and makes focusing easier. This
control has no effect on the output signals of the
camcorder.
10.
CONTRAST knob
Adjusts the contrast of the screen. This control has
no effect on the output signals of the camcorder.
11.
BRIGHT knob
Adjusts the brightness of the screen. This control
has no effect on the output signals of the
camcorder.
12.
TALLY switch
Controls the tally indicator located on the front of
the viewfinder.
HIGH: The tally indicator brightness is set to high.
OFF: The tally indicator is disabled.
LOW: The tally indicator brightness is set to low.
13.
ZEBRA (zebra pattern) switch
Controls the zebra pattern display.
ON: Display a zebra pattern.
OFF: Do not display a zebra pattern.
14.
DISPLAY switch
ON: Display text information.
OFF: Do not display text information.
15.
MIRROR switch
The image display on the monitor screen becomes
reversed horizontally or vertically when the
viewfinder barrel is raised up or rotated.
L/R: Reverse the image horizontally.
OFF: Do not reverse the image.
B/T: Reverse the image vertically.
16.
Microphone holder