Sec 2: 8-14
8.7.2
Removal of the Speaker Module (J)
1. Remove the top two screws (42) as shown in
2. Carefully pick out the Speaker Module (34) with the Black Stick and swing it out of the
Main Chassis Assembly (E) as shown in
Do not touch either the speaker cone or the Vacuum Port.
Take extra precaution to make sure neither the speaker nor
the breather pad is damaged.
Figure 8-16. Remove Top Screws
Figure 8-17. Remove Speaker Module
Be careful not to damage the speaker cone or the Vacuum Port
during the disassembly process.
Disassembly/Reassembly Procedures: Radio Disassembly
Figure 8-16.
Top Screws (42)
Speaker Cone
Figure 8-17.
Speaker Cone