Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
8.8.2
Servicing Control Top Assembly (F)
8.8.2.1 Control Top Main Seal
1. Complete steps from
2. Remove the Control Top Seal (22) with the Black Stick.
3. Replace the new seal into the groove provided in the Control Top Assembly's casting.
4. Ensure that seal is set properly and not stretched.
NOTE: There are no other serviceable components on the Control Top Assembly (F).
8.8.3
Servicing VOCON Board Assembly (D)
NOTE: There are no serviceable components on the VOCON Board Assembly.
Figure 8-32. Control Top Assembly and Control Top Seal
Section 8.7.1.
VOCON Board (14)
Figure 8-33. VOCON Board Assembly
Control Top Assembly (58)
Control Top Seal (22)
through
Section 8.7.9.
of
section 8.7 on page
Sec 2: 8-23
2:8-13.