Motorola APX 5000 Service Manual page 118

Sec 1: 8-18
8.7.7 Removal of the VOCON Board Assembly (D)
NOTE: Reconfirm the Flex connector between the Control Top Assembly (F) and the
1. Ensure RF Board is removed (see
Board screw (45) (as shown in
enough to clear the Main Chassis. Slide out the VOCON Board Assembly as shown in
Figure
VOCON Board Assembly (D) is disconnected. Failure to do so may damage the
connectors or the flex.
8-25.
Figure 8-24. Remove VOCON Board Screw
Figure 8-25. Remove VOCON Board Assembly
Disassembly/Reassembly Procedures: Radio Disassembly
Section 8.7.6 on page
Figure 8-24.), Gently rotate the VOCON Board Assembly just
RF and VOCON Board Screw (45)
VOCON Board Assembly (D)
1:8-17.). Remove RF and VOCON