Access Panel; Front Bezel - HP EliteDesk 705 G2 Small Form Factor Maintenance And Service Manual

Access panel

1. Prepare the computer for disassembly
2. Pull up the access panel handle (1), and then lift the panel off the computer (2).
To install the access panel, reverse the removal procedure.

Front bezel

1. Prepare the computer for disassembly
2. Remove the access panel
3. Lift up the three tabs on the side of the bezel (1), and then rotate the bezel off the chassis (2).
To install the front bezel, reverse the removal procedure.
20 Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis
(Preparation for disassembly on page
(Preparation for disassembly on page
(Access panel on page 20).
19).
19).