Rear Panel Components - HP EliteDesk 705 G2 Small Form Factor Maintenance And Service Manual

Rear panel components

1
2
3
4
5
6
NOTE: An optional second serial port and an optional parallel port are available from HP.
If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wake from S4 feature.
The wake from S4 feature is also supported on the PS/2 connectors if enabled in BIOS F10 Setup.
When a device is plugged into the blue Line-In Audio Connector, a dialog box will pop up asking if you want to use the
connector for a line-in device or a microphone. You can reconfigure the connector at any time by double-clicking the Audio
Manager icon in the Windows taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and the
integrated graphics on the system board may be used at the same time. However, for such a configuration, only the display
connected to the discrete graphics card will display POST messages.
The system board graphics can be disabled by changing settings in Computer Setup.
PS/2 Mouse Connector (green)
Serial Connector
RJ-45 Network Connector
USB 2.0 Ports with Wake from S4 feature (black)
Line-In Audio Connector (blue)
Power Cord Connector
7 PS/2 Keyboard Connector (purple)
8 DisplayPort Monitor Connectors
9 VGA Monitor Connector
10 USB 3.0 Ports (blue)
11 USB 2.0 Ports (black)
12 Line-Out Connector for powered audio
devices (green)
Rear panel components 3