HP EliteDesk 705 G2 Small Form Factor Maintenance And Service Manual page 103

Cursor will not move using the
Cause
Mouse does not respond to movement or is too slow.
Cause
Mouse connector is not properly plugged into the back of the
computer.
Program in use has stopped responding to commands.
Mouse may need cleaning.
Mouse may need repair.
Computer is in Sleep state.
arrow keys on the keypad.
Solution
enable the Num Lock key in Computer Setup at Advanced >
Device Options.
Solution
Shut down the computer using the keyboard.
Windows 7:
1. Press the Ctrl and Esc keys at the same time (or press the
Windows logo key) to display the Start menu.
2. Use the arrow keys to select Shut Down and then press
Enter.
3. After the shutdown is complete, plug the mouse connector
into the back of the computer (or the keyboard) and restart.
Windows 8.1:
1. Press the Windows logo +
2. Use the arrow keys to select Power, and then press Enter.
3. Use the arrow keys to select Shut Down, and then press
Enter.
4. After the shutdown is complete, plug the mouse connector
into the back of the computer (or the keyboard) and restart.
Windows 10:
1. Press the Ctrl and Esc keys at the same time (or press the
Windows logo key) to display the Start menu.
2. Use the arrow keys to scroll to and select the power icon at
the top right on the menu, and then press Enter.
3. Use the arrow keys to select Shut Down, and then press
Enter.
4. After the shutdown is complete, plug the mouse connector
into the back of the computer (or the keyboard) and restart.
Shut down the computer using the keyboard then restart the
computer.
Remove the roller ball cover on the mouse and clean the internal
components.
See the Worldwide Limited Warranty for terms and conditions.
Press the power button to resume from Sleep state.
CAUTION: When attempting to resume from Sleep state, do not
hold down the power button for more than four seconds.
Otherwise, the computer will shut down and you will lose any
unsaved data.
Solving keyboard and mouse problems
l to open the Settings charm.
93