Cooktop Will Not
Excessive Heat Around
Cookware On Cooktop
Cooktop Has Flashing
Cooking Results Not
The power supply cord is un-
A household fuse has blown or
the circuit breaker has tripped.
The cooktop control is not set
The "Control Lock/All OFF"
Cooktop Lockout is not set.
Cookware is not the proper
Lights on the cooktop flashing
on and off.
The proper cookware is not
The cooktop touch control is
not set to the proper heat level.
The appliance is not level.
Plug into a grounded 3-prong outlet.
Replace the fuse or reset the breaker.
Touch ON/OFF before selecting a setting.
See "All OFF" or "Control Lock" sections in the
Use And Care Guide.
Use cookware about the same size as the surface
cooking area, element, or surface burner. Cook-
ware should not extend more than 1" (2.5 cm)
outside the cooking area.
1. Make sure the cooktop controls are OFF.
2. Clean the cooktop touch control panel
3. If the cooktop lights continue to flash,
disconnect power, or unplug the cooktop.
4. After a few seconds, reconnect power, or plug
in the cooktop.
5. Check the two front cooktop LEDs for the
Diagnostics Failure Code.
See "Cookware" section in the Use & Care Guide.
See "Cooktop Touch Controls" section in the Use
& Care Guide.
Level the appliance (see the "Installation Instruc-