Seat Belt Operation - Cushman LSV 800 INTL Owner's Manual

SAFETY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

Seat Belt Operation

To properly secure the seat belts, pull the metal tab from the retractor and insert into the appropriate buckle located near
the center of the seat. A click will be heard when the tab is securely latched. Position the lap belt as low as possible on
the hips; not the waist. Properly adjust and ensure a snug fit by pulling the shoulder portion upward.
The retractor locks the belt when the vehicle stops suddenly. It can also lock if the occupant leans forward quickly. Slow,
easy motion allows for free travel of the seat belt.
To release the safety belt, press the buckle release button and allow the belt to retract. If the belt does not retract, check
for twists.
Owner's Guide
6