Battery Disposal; Lifting The Vehicle - Cushman LSV 800 INTL Owner's Manual

Table of Contents

Advertisement

MAINTENANCE
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

Battery Disposal

Return used batteries to the manufacturer or lead smelter for recycling purposes. For neutralized spills, put residue in
acid-resistant containers with absorbent material such as sand. Dispose in accordance with local, state and federal regu-
lations for acid and lead compounds. Contact authorized environmental people for information about disposal.

LIFTING THE VEHICLE

You must lift the front, the rear or the entire vehicle for some service and maintenance operations.
Never get below a vehicle that is supported by a jack only.
Make sure a vehicle that is supported on jack stands is stable before you get under the vehicle.
Put wheel chocks in front and behind the wheels that remain on the ground.
When you lift the vehicle, put the jacks and jack stands at the areas indicated only.
Tool List
Floor Jack.................................................................... 1
Wheel Chock ............................................................... 4
Remove payload from vehicle before lifting. No person(s) should be in or on the vehicle while lifting.
How to lift the entire vehicle:
1.
Install the wheel chocks in front and behind each front wheel
2.
Place the jack under the rear axle tube next to the differential housing.
3.
Lift the vehicle enough to place two jack stands under the frame where the leaf
spring mounting brackets are welded to the frame.
4.
Lower the jack and test the stability of the vehicle on the two jack stands.
5.
Place the jack under the center front just behind the bumper.
6.
Lift the vehicle enough to place two jack stands under the frame where the instru-
ment panel support is attached to the frame.
7.
Lower the jack and test the stability of the vehicle on all four jack stands.
36
The vehicle is not stable during the lifting process.
Make sure the vehicle is on a hard and level surface.
Do not allow any person in or on the vehicle being lifted.
Quantity
Tool List
Jack Stands................................................................. 4
Owner's Guide
Quantity

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lsv 800

Table of Contents