AMX ENV-VST-C Instruction Manual page 53

AxLink Channels (Cont.)
Channel
214
215
216
217-218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234-239
240
241
242
243
244
245
246
247
248
249
250
251-255
ENV-VST-C - Instruction Manual
Type Function
CMD/FDBK Fan State On
CMD/FDBK Fan State Auto
FDBK Fan Status
Not Used
CMD/FDBK HVAC State Auto
CMD/FDBK HVAC State Cool
CMD/FDBK HVAC State Heat
CMD/FDBK HVAC State Off
CMD/FDBK HVAC State Emergency
Heat
FDBK HVAC Cool Status
FDBK HVAC Heat Status
Not Used
FDBK HVAC Emergency Heat
Status
CMD/FDBK Humidify State Auto
CMD/FDBK Humidify State
Dehumidify
CMD/FDBK Humidify State Humidify
CMD/FDBK Humidify State Off
FDBK Dehumidify Status
FDBK Humidify Status
Not Used
FDBK Reversing valve (cool)
relay
FDBK Reversing valve (heat)
relay
FDBK 1st stage compressor
relay
FDBK 2nd stage compressor
relay
FDBK 1st stage heat relay.
Also the heat pump relay
for heat pump systems.
FDBK 2nd stage heat relay
FDBK Dehumidify relay
FDBK Humidify relay
FDBK Fan relay 1
FDBK Fan relay 2
FDBK Fan relay 3
Not Used
Description
Set the Fan state to On while the channel is ON.
Set the Fan state to Auto while the channel is ON.
Feedback, Fan Status changed, Fan status is controlled by the TSTAT.
Channel ON: Fan is On,
Channel OFF: Fan is Off.
Set the HVAC state to auto while the channel is active, ON.
Set the HVAC state to cool while the channel is active, ON.
Set the HVAC state to heat while the channel is active, ON.
Set the HVAC state to off while the channel is active, ON.
Set the HVAC state to Emergency Heat while the channel is active, ON.
Feedback, HVAC Cool Status changed
Channel ON: A/C is On,
Channel OFF: A/C is Off.
Feedback, HVAC Heat Status changed
Channel ON: Heat is On,
Channel OFF: Heat is Off.
Feedback, HVAC Emergency Heat Status changed
Channel ON: Emergency Heat is On,
Channel OFF: Emergency Heat is Off.
Set the humidify state to auto while the channel is active, ON.
Set the humidify state to dehumidify while the channel is active, ON.
Set the humidify state to humidify while the channel is active, ON.
Set the humidify state to off while the channel is active, ON.
Feedback, Dehumidify Status changed
Channel ON: Dehumidifier is On,
Channel OFF: Dehumidifier is Off.
Feedback, Humidify Status changed
Channel ON: Humidifier is On,
Channel OFF: Humidifier is Off.
Provides feedback from relay O.
Provides feedback from relay B.
Provides feedback from relay Y1.
Provides feedback from relay Y2.
Provides feedback from relay W1.
Provides feedback from relay W2.
Provides feedback from relay DEH.
Provides feedback from relay HUM.
Provides feedback from relay G1.
Provides feedback from relay G2.
Provides feedback from relay G3.
Programming
53