Thermostat Setup; Thermostat Setup Screen - AMX ENV-VST-C Instruction Manual

Viewstat color communicating thermostat

Hide thumbs Also See for ENV-VST-C:

Table of Contents

Use the navigation buttons to select Settings, and press Mode/Select. The Settings screen appears.

Use the navigation buttons to select Advanced Settings. Press Mode/Select to access the Security Code screen.

Enter the security code, and select Enter to access the User Preferences screen. See the Entering the Security Code on

page 30 for more information.

Use the navigation buttons to highlight More, and press Mode/Select to access the second User Preferences screen.

On the second User Preferences screen, use the navigation buttons to highlight More, and press

Mode/Select to access the third User Preferences screen.

Use the navigation buttons to highlight Advanced Setup, and press Mode/Select to access the Advanced Setup screen.

Use the navigation buttons to highlight More, and press Mode/Select to access the second Advanced Setup screen.

Use the navigation buttons to highlight AxLink Setup, and press Mode/Select to access the AxLink Communications screen

(FIG. 46).

AxLink Communications screen

FIG. 46

10. Use the navigation buttons to scroll through the numbers until you reach the first digit in the code, and press Mode/Select to

move to the next digit in the code.

11. Repeat the previous step until you have entered the full three-digit code.

12. Press Mode/Select while Enter is selected.

NOTE: Changing the address of an AxLink device can result in some features on the thermostat to stop working.

Thermostat Setup

Thermostat Setup screens

FIG. 47

The Thermostat Setup screens (FIG. 47) enable you to set temperature differentials between the heating and cooling setpoints. On

this screen, you can also set the balance point if you have a single or dual stage heat pump system. You can use the navigation

buttons to move through the highlighted options. The Mode/Select button selects the highlighted item. You can then use the

navigation buttons to change the setting of the highlighted option.

Pressing Mode/Select again highlights the next available option.

ENV-VST-C - Instruction Manual

Advanced Thermostat Operations

Table of Contents