Away Mode Screen; Establishing Away Mode Settings - AMX ENV-VST-C Instruction Manual

3. Use the navigation buttons to select the day of the week to which you want to copy the settings, and press Mode/Select. A
green check mark appears next to the day you select. Repeat this step for every other day to which you want to copy the
settings.
4. Use the navigation buttons to select Done, and press Mode/Select. The thermostat copies the settings to all the selected
days. You can verify this on the Program screen by highlighting Next Day and pressing Mode/Select to view the settings for
each day in the week.

Away Mode Screen

The Away Mode screen (FIG. 27) enables you to set heating, cooling, humidify, and dehumidify setpoints that remain unchanged
until a specific date and time. You can use the navigation buttons to move through the highlighted options. The Mode/Select button
selects the highlighted item. You can then use the navigation buttons to change the setting of the highlighted option.
Away Mode screen
FIG. 27
Pressing Mode/Select again highlights the next available option. The following table lists the options on the Away Mode screen:
Away Mode Screen Options
Away Mode
Return Date
Return Time
Cooling Temp
Heating Temp
Humidify
Dehumidify
Exit

Establishing Away Mode Settings

Away Mode settings enable you to create heating, cooling, humidify, and dehumidify setpoints that remain unchanged until a
specific date and time. When the time limit expires, the thermostat uses the previous program or hold mode settings you set.
Perform the following steps to create away mode settings:
1. From the Main screen, press Mode/Select to access the Thermostat Mode screen (FIG. 24).
2. Use the navigation buttons to select Away, and press Mode/Select. The Away Mode screen appears (FIG. 27).
3. Press Mode/Select to enable your Away Mode settings. Enabling the Away Mode settings automatically selects the Return
Date option.
4. Press Mode/Select to change the return date. The month, day, and year each change individually, so use the navigation
buttons to change the month. Press Mode/Select again to select the day, and use the navigation button to change it. Repeat
the process one more time to change the year.
5. Press Mode/Select to change the return time. The hour, minute, and clock period each change individually, so use the
navigation buttons to change the hour. Press Mode/Select again to select the minute, and use the navigation button to
change it. Repeat the process one more time to change the clock period.
6. Press Mode/Select to change the cooling temperature, then use the navigation buttons to indicate the cool setpoint you want.
7. Press Mode/Select to change the heating temperature, then use the navigation buttons to indicate the heat setpoint you want.
ENV-VST-C - Instruction Manual
The Hold temperature overrides the heating and cooling settings. If you select Disabled, the thermostat uses the heating
and cooling settings you establish on the Hold Mode screen.
The thermostat uses the settings until the date you indicate here.
The thermostat uses the settings until the time you indicate here on the date you indicate in Return Date.
Establishes the level of desired coolness for the HVAC system.
Establishes the level of desired heat for the HVAC system.
Establishes the level of humidity. This option does not appear if you have the Humidification System option turned off in
the Advanced Setup options.
See the Advanced Setup Screen section on page 37 for more information.
Establishes the level of de-humidity. This option does not appear if you have the Dehumidification System option turned
off in the Advanced Setup options.
See the Advanced Setup Screen section on page 37 for more information.
Exit the Away Mode screen and return to the Main screen.
Setup and Configuration
26