Locking The Mode Settings; Advanced Setup Screen - AMX ENV-VST-C Instruction Manual

Viewstat color communicating thermostat

Hide thumbs Also See for ENV-VST-C:

Table of Contents

Button Lockout screen (2 of 2)

FIG. 40

Use the navigation buttons to select Fan Lock, and press Mode/Select to toggle the fan lockout setting between Yes and No.

10. Use the navigation buttons to select Fan Lock Time, and press Mode/Select activate it.

11. Press Mode/Select multiple times until you reach the fan lock time value you want.

Locking the Mode Settings

You can lock the mode settings on the thermostat so no one can change them. When you lock the mode settings, you must set an

amount of time for the settings to be locked. You can set the time limit to any amount of time between 0 and 60 minutes. After the

time limit expires, the mode settings automatically unlock and can be changed again. Perform the following steps to lock the mode

settings:

From the Main screen, press Mode/Select to access the Thermostat Mode screen.

Use the navigation buttons to select Settings, and press Mode/Select. The Settings screen appears.

Use the navigation buttons to select Advanced Settings. Press Mode/Select to access the Security Code screen.

Enter the security code, and select Enter to access the User Preferences screen. See the Entering the Security Code on

page 30 for more information.

Use the navigation buttons to highlight More, and press Mode/Select to access the second User Preferences screen.

Use the navigation buttons to highlight Button Lockout.

Press Mode/Select to access the Button Lockout screen.

Use the navigation buttons to highlight More, and press Mode/Select to access the second Button Lockout screen (FIG. 40).

Use the navigation buttons to select Mode Lock, and press Mode/Select to toggle the mode lockout setting between Yes and

No.

10. Use the navigation buttons to select Mode Lock Time, and press Mode/Select activate it.

11. Press Mode/Select multiple times until you reach the mode lock time value you want.

Advanced Setup screens

FIG. 41

The Advanced Setup screens (FIG. 41) enable you to indicate the type of HVAC system you are using, activate temperature sensors,

and set the date for the thermostat. The thermostat automatically computes the day of the week based on the date you input.

These settings should be set when the thermostat is initially installed, and should not need to be updated with regular use. You can

use the navigation buttons to move through the highlighted options. The Mode/Select button selects the highlighted item. You can

then use the navigation buttons to change the setting of the highlighted option.

Pressing Mode/Select again highlights the next available option. The following table lists the options on the Advanced Setup screen:

ENV-VST-C - Instruction Manual

Advanced Thermostat Operations

Table of Contents