Changing The Fan Mode; Help Screen - AMX ENV-VST-C Instruction Manual

Changing the Fan Mode

You can access Fan mode by pressing Mode/Select two times after accessing Hold mode. You can use the navigational buttons to
scroll through the list. You can also change the Fan mode on the Settings screen.
Fan Mode menu
FIG. 20
The change takes effect when you press Mode/Select or after a 10-second timeout.
Fan Mode Options
Fan Auto
Fan On
Perform these steps to change the Fan mode:
1. On the Main screen, hold Mode/Select for three seconds. The Hold Mode menu appears.
2. Press Mode/Select two times to switch to the Fan mode menu.
3. Use the navigational buttons to select the option you want.
4. Press Mode/Select to activate the selected mode.

Help Screen

The Help screen provides simple instructions on how to use the thermostat. This screen is accessible by pressing Mode/Select on
the Main screen, but only if Help mode is active.
Pressing Mode/Select again moves the thermostat to the next available screen.
Help screen
FIG. 21
Follow these steps to activate, or deactivate, the Help screen.
1. From the Main screen, press Mode/Select to access the Thermostat Mode screen.
2. Use the navigation buttons to select Settings, and press Mode/Select. The Settings screen appears.
3. Use the navigation buttons to select Advanced Settings. Press Mode/Select to access the Security Code screen.
4. Enter the security code, and select Enter to access the User Preferences screen. See the Entering the Security Code section on
page 30 for more information.
5. On the User Preferences screen, use the navigation buttons to highlight More, and press Mode/Select to access the second
User Preferences screen.
6. On the second User Preferences screen, use the navigation buttons to highlight More, and press
Mode/Select to access the third User Preferences screen.
ENV-VST-C - Instruction Manual
Sets the fan to Auto mode. When in Auto mode, the fan runs only when the HVAC system is actively heating or cooling.
Turns on the fan. The fan runs continuously in this mode until you change it to Auto mode.
Setup and Configuration
22