Thermostat Mode Screen; Program Screen - AMX ENV-VST-C Instruction Manual

Thermostat Mode Screen

The Thermostat Mode screen (FIG. 24) displays a menu providing a list that enables you to navigate to other screens to create
settings for different times and occasions. You can use the navigation buttons to move through the highlighted options. The Mode/
Select button selects the highlighted item.
This screen returns to the main screen after a 20-second timeout.
Thermostat Mode screen
FIG. 24
The following table lists the options on the Thermostat Mode screen:
Thermostat Mode Screen Options
Enable Program Mode/
Enable Permanent Hold
Program
Away
Settings
Exit

Program Screen

The Program screen (FIG. 25) enables you to set heating, cooling, humidify, and dehumidify setpoints for various times of the day
for each day of the week. Entering this screen automatically puts the unit into Program mode. You can use the navigation buttons
to move through the highlighted options. The Mode/Select button selects the highlighted item. You can then use the navigation
buttons to change the setting of the highlighted option.
Program screen
FIG. 25
Pressing Mode/Select again highlights the next available option. The following table lists the options on the Program Setting
screen:
Program Screen Options
Period
Heat
ENV-VST-C - Instruction Manual
Turns on Program mode or Permanent Hold. The option that is currently inactive appears here. Select the
option that appears to activate it. Program mode activates the settings you establish on the Program screen.
Permanent Hold mode disregards the heating and cooling settings established on the Program screen until
the user sets the Hold mode back to Program.
Opens the Program Settings screen. See the Program Screen section on page 24 for more information.
Opens the Away Mode screen. See the Away Mode Screen section on page 26 for more information.
Opens the Settings screen. See the Settings Screen section on page 27 for more information.
Returns to the Main screen.
Separate times of the day when you can create heating, cooling, humidify, and dehumidify setpoints. The available times are
Wake, Leave, Return, and Sleep.
The level of desired heat for the HVAC system during the selected period.
Setup and Configuration
24