Changing The Filter Settings - AMX ENV-VST-C Instruction Manual

Changing the Filter Settings

If you set the thermostat to tell you when your filter needs to be changed, you must also indicate how often you want the
thermostat to remind you. You can choose from 30, 60, 90, 120, 150, or 180 days. When the Filter Change Reminder feature is
enabled (see the Disabling the Filter Change Reminder section on page 33 for more information), the thermostat monitors the
number of calendar days since the feature was set. When the operation time reaches the selected number of days, a filter change
reminder icon displays to alert you to change the filter. Perform the following steps to change the filter settings:
1. On the Main screen, press Mode/Select until the Thermostat Mode screen appears (FIG. 24).
2. Use the navigation buttons to select Settings, and press Mode/Select. The Settings screen appears (FIG. 28).
3. Use the navigation buttons to select Filter.
4. Press Mode/Select to toggle the Filter setting between 30, 60, 90, 120, 150, or 180 days.
ENV-VST-C - Instruction Manual
Setup and Configuration
28