Quick Set Temperature; Adaptive Preheat Feature; Manual Mode; Temporary Override - Danfoss 088L5130 User Manual

Programmable Thermostats 088L5130/5132
9
Press the OK button. The temperature setting will now fl ash in
the upper part of the display.
10
Press the Up or Down buttons to set the required temperature.
11
Press the OK button. The symbol for the next event (e.g. at
work) will now fl ash, allowing you to set the time and tempera-
ture for this period of the day by repeating steps 6-12.
12 Once time and temperature have been set for the four events
applicable for the 5-day period Monday to Friday, Exit will fl ash.
13 Press the OK button. The next 2 days, Sat Sun, will then fl ash.
Please note that now only two events (Day and Night) are dis-
played.
14 Press the OK button. The symbol for the fi rst event will fl ash.
15 Set the time and temperature for this event, and for the following
event, by repeating steps 6-12.
16 Finally, select Exit to exit the Program for a 5:2 schedule.
SET TEMP
PROGRAM

Quick Set Temperature

I want to permanently change the temperature for
the event currently active in the automatic program.
To do so, you must:
1 Press the Up or Down buttons to set the required temperature
for the event currently active.
2 Press the OK button.
The new temperature setting will then be saved and used for this
event in the future.
Example: If you change the temperature on a Tuesday morning
while the thermostat is running a 5:2 program, the new tempera-
ture will apply to all mornings from Monday to Friday.

Adaptive Preheat Feature

I want to ensure that the required temperature has
already been reached when I get up in the morning
or come home from work.
To do so, you must activate the adaptive function:
1 Press the OK button to activate the menu.
2 Press the Up or Down buttons until the Settings option fl ashes.
3 Press the OK button.
4 Press the Up or Down buttons until the Adaptive option
fl ashes.
5 Press the OK button. On or Off will now fl ash in the upper part
of the display.
6 Press the Up or Down buttons until On fl ashes.
7 Press the OK button.
8 Select Exit to exit the option.
Please note: The adaptive preheat function is only related to the
4-event program and only works in connection with going from one
event to another where the temperature is going to be raised.
EXIT
SAT SUN
© 2009 Danfoss Inc.
The adaptive preheat feature calculates when the thermostat must
start the heating system to ensure that the required temperature
is reached at the set time. Three days after the adaptive preheat
feature has been activated, it has learned when the heating must
be switched on to attain the required temperature.
Factory setting: ON
TIME
DAY
CHILDLOCK
SETTINGS C°/F°
APPLICATION
OFFSET TEMP
READOUT
ADAPTIVE
DISPLAY
FACTORY RESET
EXIT

Manual Mode

I want to temporarily cancel the automatic 4-event
program and manually select temperature.
To do so, you must use manual mode:
1 Press the OK button to activate the menu.
2 Press the Up or Down buttons until the Mode option fl ashes.
3 Press the OK button.
4 Press the Up or Down buttons until Man. mode fl ashes in the
upper part of the display. The temperature will begin to fl ash.
5 Press the Up or Down buttons until the required temperature
fl ashes.
6 Press the OK button.
Please note: This feature can be useful for instance if you are go-
ing on holiday and want to maintain a frost protection temperature
(e.g. 41°F) while you are away.
To return to the automatic 4-event program, you must select Auto.
Please refer to page 2 for instructions.
MAN. MODE
MODE

Temporary Override

I want to temporarily set a comfort temperature for
a single event, e.g. because I am not at work one
day and want to maintain a higher temperature or
because I am having a party.
To do so, must use override mode:
1 Press the OK button twice to activate the menu.
2 Press the Up or Down buttons until the Mode option fl ashes.
3 Press the OK button.
4 Press the Up or Down buttons until Override fl ashes in the up-
per part of the display. The temperature will begin to fl ash.
5 Press the Up or Down buttons until the required temperature
fl ashes.
6 Press the OK button.
English
3