Programming The Hot Water - Danfoss FP975 User Manual

c) DAY to advance to the next
day.
Alternatively press COPY to
keep the same settings as the
day before.
4. Press the PROG button to
return the unit to RUN mode
GB
(time appears and colon in the
display begins to fl ash).
5. Proceed to 'Programming the
Hot Water' below.

1.7.3 Programming the Hot Water

To set the hot water programme
press the PROG button until SET HW
ON TIME appears on the display.
Set the hot water programme
in the same way as the heating
programme, using:
a) + and - buttons to alter the
time,
b) pressing the NEXT ON/OFF
button to move to the next
setting,
c) pressing DAY to advance
through days of the week
(7 day mode) or to advance
to
programming (5/2 day mode).
Finally press PROG to return the
unit to run mode (time appears and
colon in the display begins to fl ash).
12
Saturday and Sunday
FP975