Machine Parameters And Performance; Specifications - Saeco Xsmall Plus Service Manual

XSMALL
2.1. Technical specifi cations
Power supply and output:
Temperature monitoring:
Safety system:
Coffee heat exchanger output:
Stainless steel
Gear motor:
Pump:
Overpressure valve:
Water fi lter:
Coffee grinder:
Hot water/steam valve
Automatic dosage
Power consumption:
Dimensions: W x H x D in mm:
Weight:
Water tank capacity:
Coffee container capacity
Coffee dreg drawer capacity
Heat exchanger capacity:
Water circuit fi lling time:
Heating time:
Dispensing temperature:
Grinding time:
2.2.

Machine parameters and performance

AMOUNT
OF PRODUCT
Espresso
Medium coffee
Large coffee
Pre-ground
Hot water
Steam for frother
Steam for Milk-
Island
Saeco Int.
02 TECHNICAL SPECIFICATIONS
230 V~ 50/60 Hz 1500 W - 120 V~ 60 Hz 1500 W - 100 V~
50/60 Hz 1300 W
Variable resistor sensor (NTC) - transmits the value to the
electronic P.C.B.
2 manual reset or one-shot thermostats (175°C)
(230/120 V~) 1300 W - (100 V~) 1100 W
for coffee, hot water and steam dispensing
33VC with 2 rotation directions; power supply 24VC
Ulka with reciprocating piston and 100°C cutout 48 W, 230 V, 50
Hz, Type EP5 approx. 13-15 bar 120 V, 60 Hz 100 V, 50/60 Hz
Opens at approx. 16-18 bar
In tank
Direct current motor with fl at ceramic grinders
Presblock
Dose adjustment controlled by the electronic system
During the heating phase - approx. 5.6 A
295x325x420
6.9 kg
1.0 litres
185 g coffee beans
08
Approx. 10 cc
Approx. 15 seconds for fi rst fi lling cycle
Approx. 45 seconds
Approx. 84 ± 4°C
Approx. 8-10 seconds
Minimum Default Maximum
amount amount amount
(Puls.) (Puls.)
70 165
No No
70 440
Continues until the water supply has been exhausted (fi ll circuit
Continues until the water supply has been exhausted (fi ll circuit
Rev. 00 / Jul. 2008
Programm. by
the user
(Puls.)
600 Yes
No No
600 Yes
No
status)
status)
No
Programm. by
Production/Serv-
ice department
No
No
No
Page 1 / 4