Draining The Boiler (Steam Out) - Saeco Xsmall Plus Service Manual

05 TEST MODE
lev. pos. selector
L1
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
L2
PRESS THE ON/OFF KEY TO ACCESS THE NEXT LEVEL UP
L3
5.2.

Draining the boiler (Steam Out)

To drain the boiler, proceed as follows:
MACHINE UNPLUGGED
- Turn the selector to the water position
machine in.
- The three LEDs light up and remain lit.
- Release the large coffee key; the LEDs will begin to blink in an anti-clockwise cycle and boiler
draining will commence (remember to place a recipient underneath the steam hose).
- When the draining process is complete, the double coffee and temperature LEDs will remain lit.
- Unplug the machine to end this procedure.
- Press on/off; the coffee maker will begin fi lling the circuit (red LED 3 blinks quickly).
page 2 / 2
LED key function
brewing unit
ON
microswitch
brewing unit
ON
microswitch
OFF
power con-
Blinks
sumption of
the unit in mA
ON
pump opera-
turbine opera-
Blinks
coffee pipe
operation
power con-
sumption of
the boiler
coffee grinder
operation
Blinks
coffee grinder
, press and hold the large coffee key and plug the
Rev. 00 / Jul. 2008
notes
Gear motor rises (brewing
unit in work position)
Gear motor falls (brewing
unit in home position)
OK
Between 200 and 300 mA
OK with unit inserted
KO
over 300 mA
Make water come out of
tion the steam hose
Each blink corresponds to
tion one turbine rotation
Return to L1
the unit to Work, return to
L2 and make water come
out of the dispenser
Use an ammeter to check
the power consumption is
between 5.3 and 6.1 mA
Each blink corresponds to
sensor one coffee grinder rotation
XSMALL
and switch
Saeco Int.